FW MONITOR
Purpose:
Many people have had some experience in running basic fw monitor commands but the purpose of this “cheat sheet” type document is to familiarize the reader with the more complex commands and configurations for fw monitor. Knowing how to use fw monitor well will negate the need for ever using snoop or tcpdump.
Why fw [...]
This is very usefull artical to change some kernel global parameters on all platfroms running Checkpoint product:
Cause
There are many global parameters to customize using the fw ctl set int command. This command takes effect immediately, but variable changes return to its default value after a reboot. At times, it may be required for changes to [...]
Product Alerts ID: 1210139
Version: 1.0
Published: March 19, 2008
Details
Executive Summary
Severity: Low
Recommendation: Apply patches described in sk34579
Reference
* http://www.kb.cert.org/vuls/id/992585
* Check Point SecureKnowledge sk34579
Description of Issue:
Remote Access Client (C) connects to a gateway (A). A site-to-site VPN tunnel exists between gateways (A) and (B). If the Remote Access [...]
================================================== =======
CCSE NGX 156-315.1 study guide
================================================== =======
? Configure SIP environment
1. Configure an object that represents the proxy or VoIP domain SIP object
2. To define a VoIP domain SIP object, First must define the following
? Configure a network object representing the IP addressed phones - (Node objects can be defined for individual phones. Objects can be [...]
CCSA Study Guide – NGX 156-215.1
Licensing
* Central
? The new license remains valid when changing the IP address of the Check Point Gateway. There is no need to create and install a new license.
? Only one IP address is needed for all licenses.
? A license can be taken from one Check Point Gateway and given to [...]